Bushog
Mainiak1
Join Date: Jul 2003 Posts: 22 Maine |
2002-10-07 43513
I just purchased a 790 John Deere. I'm going to have to purchase a bushog for it. I'm going to cut about 11 acres.
Am I right to assume I should be looking at a five footer?
I'm looking at any feedback I can get.
Thanks in advance,
Norm
Reply to | Quote Reply | Add Photo
Bushog
TomG
Join Date: Feb 2002 Posts: 5406 Upper Ottawa Valley |
2002-10-08 43544
It really depends on what's being cut and how fast you want to go.
I don't have a rotary cutter, but I believe that a 5' light-duty is about right for my 24 pto hp tractor. Light-duty cutters are usually rated for up to 1" material. Most cutter manufacturers have web sites where recommended HP for their different models and duty grades can be found. The recommendations tend to be a bit conservative but are good guides. For my 1710, I think I get something smaller than 5' even if it didn’t cover my wheel tracks if I had brush with saplings to cut.
The 1710 might have enough hp for to run a mower larger than 5' if only short grass is cut. However, I'd keep in mind that larger cutters are heavier, less maneuverable and harder on pto clutches. I'd probably stick with 5'.
....
Reply to | Quote Reply | Add Photo
Bushog
dsg
Join Date: Jun 1999 Posts: 528 Franklin, Maine Pics |
2002-10-08 43565
Norm, Tom's right you shouldn't put anything larger than a 5' on a 790. I have a 4700 and run a JD MX6 and don't like cutting anything larger than 1" with it. It's rated as a medium duty and can cut 2" but gives it a-hell of a thrashing doing it.
David ....
Reply to | Quote Reply | Add Photo
Bushog
IRTEXN
Join Date: Jul 2003 Posts: 51 Texas |
2002-10-08 43570
Norm,
Can I suggest getting the deflector chains on your cutter. They are an option on some cutters. The deflector strips will help but the chains are better IMHO. I had a friend killed a few years back by something thrown from a cutter (from 75 yards away) A little extra safety never hurts ....
Reply to | Quote Reply | Add Photo
Bushog
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2002-10-08 43576
Good God! How can chains be an option? ....
Reply to | Quote Reply | Add Photo
Bushog
mainiak1
Join Date: Posts: 1 |
2002-10-09 43586
Thanks for all the feedback guys. I'm new to the larger tractors. I can't figure out the abbreviations "IMHO". Also
I assume the deflector chains go on the bottom sides of the bushhog?
I figured out "FEL". Does that graduate me to farm school 1st grade?
Thanks again for all the response
Norm
....
Reply to | Quote Reply | Add Photo
Bushog
mainiak1
Join Date: Posts: 1 |
2002-10-09 43587
My wife just solved the IMHO puzzel. I guess I go back
to kindergarden.
Norm ....
Reply to | Quote Reply | Add Photo
Bushog
DRankin
Join Date: Jan 2000 Posts: 5116 Northern Nevada Pics |
2002-10-09 43595
Yes the chains would hang like a fringe around the bottom edge of the cutter body. As to the anachronisms, some are tractor lingo and some are computer shorthand. Look under faq (there's another one!) on the header for some of the shorthand lingo. ....
Reply to | Quote Reply | Add Photo
Go Top
Share This